LOXONE CONFIG SERIAL NUMBER

The Loxone Remote Connect service supports access via any IPv4/IPv6 combination. If you are using another DDNS service, use your registered address instead.

LOXONE CONFIG SERIAL NUMBER

The latter part of the address is the serial number of your Miniserver. When using Loxone Cloud DNS, the Miniserver can be reached from the Internet after a few minutes at an address according to the scheme. To also enable remote configuration via Loxone Config, enable the option:Īllow this Miniserver to be configured remotely with Loxone Config over the internet.įinally, click on Apply and send to Miniserver and the Miniserver will reboot. The Loxone Cloud DNS service is used to simplify access if you do not receive a static address from your Internet service provider and the external IP changes frequently.Īlternatively, you can use a different DDNS service, and enter the static address in this field. We recommend selecting a port that is not included in the following list: Such ports are theoretically exposed to a higher risk of attacks from the Internet. Many ports are also used for popular services and are therefore well known.

*Please note that some ports are considered unsafe by some browsers or Internet service providers and may be blocked. When using HTTPS, it is recommended not to use or forward the HTTP port for external access (enter 0). Select a port in the range of 1024-49151*. The selected port must then be configured in the router’s port forwarding settings.įor applications with increased security requirements, a VPN connection to the Miniserver can be used.Įnter the external port for the connection in HTTPS Port.

Not recommended for the current Miniserver. Then open Configure Miniserver, and activate Manual external access:Įnter the external port for the connection in HTTP Port. Start Loxone Config and connect to your Miniserver. Please always use the latest software (Loxone Config, Firmware, Apps).Ī secure and strong password to access the Miniserver is also important.

Loxone config